Our staff will be out of office 10/3-10/6. Shipping and support resume Monday, 10/7
press Enter to searchShowing all results:No products found.
Accelerator M-LOK Instructions
What's In The Packaging
Qty
Accelerator
1x
#10-24 Hex Screw
2x
M-LOK T-Nut
2x
Hey Key / L-Key
1x
Step-by-Step Instructions
1. Begin by installing two M-LOK T-Nuts into the Accelerator body, securing them with two hex screws. Ensure the M-LOK nuts are on the top of the Accelerator body, and the screws facing upward from underneath.
2. Place your Accelerator in the desired M-LOK slots on your rail system. Be sure the Accelerator is fully engaged and flush with the rail.
2. Using the included hex key or torque-driver, hand tighten the Accelerator screws to your rail system with no more than 18-inch pounds of torque.
WARNING! To prevent damage to your Accelerator or handguard, do not overtighten! Do not use a power tool to install the Accelerator.
For a detailed guide on the M-LOK installation process, see the official Magpul instructions below:
