Nano Carrier V2 M-LOK Instructions


Important note: New NANO Carriers may be stiff, making installing and removing the NANO tool slightly difficult. After a few uses, the fitment should improve.

INSTALLATION INSTRUCTIONS

  • Slot the provided screw through the port on the NANO Carrier, thread the M-LOK nut on the other side, and follow the M-LOK installation guide from Magpul below. Use a T25 Torx bit for installation.
  • Do not tighten past 10-inch pounds.
  • To prevent walk-out under recoil, thread-locker is recommended.

General M-LOK Instructions