Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns
Plus1 for 12 Gauge Shotguns

Plus1 for 12 Gauge Shotguns

EMPLS1-12G-S-BLK

Regular price$29.00
/
Shipping calculated at checkout.

Reload your 12-gauge pump-action shotgun with an additional shell in less than one second. Easily reload from over or under, with either hand. Designed for maximum speed and repeatability.

  • Compatible with 12-gauge pump-action shotguns with a flat surface below the breech
  • Toolless, fast, and easy installation with included 3M tape
  • Snap-in retention holds shell securely, preventing it from falling out during use
  • Designed for 2-3/4" shells
  • Rugged, durable design
  • Made in the USA
  • Patent pending
Color Black
  • In stock, ready to ship
  • Backordered, shipping soon
  • Compatible with 12 Gauge Pump-Action Shotguns
  • Lifetime warranty

One more shell, in the nick of time.

Plus1 holds a 12-gauge shell just beneath your breech, and with the push of your fingers, loads it directly into the receiver.

Lightning fast.

Reload another shell in less than a second. Switch to a slug round, or just extend your capacity - and stay in the fight.

Designed specifically for 12-gauge pump-action shotguns

Plus1 works on any 12-gauge pump-action shotgun with a flat, even surface just below the breech.

Ultra-strong adhesive.

We supply the Plus1 with 3M VHB tape. It's automotive-grade, high-temperature and high-impact resistant, waterproof, and extremely durable.

This adhesive is strong enough to support the entire weight of your firearm. It won't knock or fall off, melt in the sun, or get weak under recoil.

Don't trust the tape to hold the Plus1? Let's take a swing at it.

Supports standard 2-3/4" shells, up to 2.5" in actual length.

Specifications

Material Nylon polymer
Mounting method 3M VHB Adhesive Tape
Heat resistance 300°F +
Gauge compatibility 12g
Shell size compatibility Standard 2-3/4" shells
Length 2.9" (74mm)
Width 1.0" (26mm)
Height of mounting surface 0.7" (18mm)
Total height 0.8" (21mm)
Weight (without shell) 0.4oz (12g)
2.9" (74mm)
1.0" (26mm)
0.7" (18mm)
0.8" (21mm)

Built for Shotguns

Works on 12-gauge
pump-action shotguns

Made in the USA

American-made with domestic
and imported materials*

Lifetime Warranty

Our guarantee covers any
manufacturers defect

  • 5 stars: 21 (88%)
  • 4 stars: 3 (13%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
R
Russell G.

Easy install, great way to carry an additional +1 on a capacity limited weapon light a shotgun. Feels very sturdy, the 3M adhesive is no joke. Quick and intuitive loading process. Zero complaints.

D
Drew C.

The plus 1 was quick to get used to and works flawlessly.

J
Jeremy C.

Good quality at a great price. I appreciate that it came with a cleaning pad and an extra sticker patch

C
Christopher

works

J
J.P

Awsome product very will made stand up to the rain and holds a shotshell well i would definitely by another one

D
Daniel T.

Fire

W
William R.

I really like this product, I have one on my ptr jack and it is excellent, I have used it for just adding additional and quick reload to the gun and also had it set up in case I need a slug in the firearm quickly.

B
Braylee D.

Stayed pretty well and tried to knock it off with a hammer like in the videos. Didn't even budge.

B
Brian K.

So far so good. Works perfectly on a Remington 870.

E
Eric T.

It's easy to install and so far stays solid on the receiver. Badass plus 1!

H
Humayun Rahman

Great product. Go see my initial impression on my page ‘Rahmanology’

F
Frank G.

I was a little skeptical about putting this directly under the ejection port. Once installed it proved to be no hinderance to operation and the design represents a legitimate cheat code for executing a port reload in a really efficient way. I'll continue to use it and see if I can make it fail, but right now I'm thinking I won't be able to.

w
william giles

Get at least one four shotgun. It is an outstanding product.

D
Darius J.

It is an absolutely must that you get one for your shotgun. I was training in the Carolina heat and it stayed on even with slug rounds.
It will give you faster reloads!
I ordered 2 more.

M
Matthew K.

"Oh hell yeah"

M
Moises S.

An excellent product from and exceptional company a perfect accessory for any serious shotgunner easy install and has held up great while shooting a definite recommend for any shotgun operator

J
Jackson B.

Good product. The first adhesive didn't want to stick, the second one (included) is rock solid.

J
Jonathan

the 3m tape it comes with is super tough!

j
jonathan daly

the 3m tape it comes with is super tough!

L
Lowkey Prepared

The Plus1 is a simple but extremely well thought out design. There don't seem to be many options for a "match saver" for pump action shotguns. Using 3M seems to be a simple but effective way of attaching the Plus1 to the receiver. The open mid-section allows you to use your "web shooter" fingers to pop the shell into the port. Since you don't have to come over the top of the receiver (with a bit of practice) your port reloads can become extremely efficient. I've included a short clip for a comparison of how I was doing my port reload using a shell card and the Plus1. Overall this is a fantastic product and I'm extremely happy I was able to get one from the first batch available to consumers.

K
Keenan M.

solid!

M
Marc F.

The plus one is a well thought out great designed device for chamber loading your pump shotgun. As an LE firearms instructor who created bc and ran the shotgun slug cadre for LAPD I would have loved to have this device when we were training hundreds of cadre members. I currently co own Sentinel Defense LLC offering 5 POST certified courses for Agencies in California.

R
RYAN

Worked better than i thought. So ive used match savers before and this one is one if my favorates. Not the best looking nut not terrible. I do love how effortless it is to pop that shell in the shotgun.

R
Ryan Trujillo

Worked better than i thought. So ive used match savers before and this one is one if my favorates. Not the best looking nut not terrible. I do love how effortless it is to pop that shell in the shotgun.

*Made in the USA with globally sourced components. While the primary product components are manufactured in the United States, certain hardware and packaging materials may be imported. California Prop 65 Warning: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information visit www.P65Warnings.ca.gov